V-MARK SOLVENTBORNE PAINT
Detail
PRODUCT DESCRIPTION
V-MARK SOLVENTBORNE PAINT is a special paint made from film, pigment, filler and solvent used as traffic signal, water, alkali, petrol and oil. high abrasion resistance.
PRODUCT STANDARDS
V-MARK SOLVENTBORNE PAINT meets the requirements of TCVN 8787-2011 for traffic signal paint - Line paint solvent system - Technical requirements and test methods and TCVN 8788-2011 Traffic Paint - Line paint solvent system - Technical requirements and testing methods
APPLICATION RANGE
V-MARK solvent line markers are used for: airport runways, highways, bridges, wharves, delimiters, parking lots, playgrounds, race tracks, factory floors , etc.
TECHNICAL SPECIFICATIONS
|
Numerical order |
Technical target |
Technical requirements |
Test method |
|
1 |
Color a) White b) Yellow c) Black |
≥ Y 35 Y 12 ÷ Y 14 ≥ B 64 |
TCVN 2102-1993 hoặc AS 1580.601.1 And refer to the standard sample AS 2700S |
|
2 |
Stability |
≥ 8 |
AS 1580.211.1 (pigment deposition after 4 weeks in stock) (ASTM D 1309-93) |
|
3 |
Smoothly |
75 ÷ 90 mm |
TCVN 2091-1993 |
|
4 |
Viscosity |
60 ÷ 80 Kreb (or equivalent) |
AS 1580.214.1 |
|
5 |
Brightness a) Paint is white b) Paint is yellow c) Paint is black |
≥ 75 % ≥ 55 % Do not apply |
|
|
6 |
Storage capacity of glass beads |
≤ 10 % weight |
(% The amount of glass lost after the scan) |
|
7 |
Drying time a) Fast drying paint b) Dry paint slowly |
≤ 5 min ≤ 15 min |
|
|
8 |
Glossiness |
≤ 20 glossy unit |
TCVN 2101-1993 |
|
9 |
Flexibility |
≥ 12 mm |
TCVN 2099-1993 (Minimum shaft diameter that the bending film does not flatten and break) |
|
10 |
Adhesion a) White b) Yellow |
≥ 90 % ≥ 80 % |
TCVN 2097-1993 |
|
11 |
Color resistance |
≤ 3 % |
(Reduced brightness of the film measured on the specimen sheet and on the adhesive tape) |
|
12 |
Impact resistance |
Surface is not exposed through the film |
(Performs 3 free collisions with 2.25 kg of steel) |
|
13 |
Oil resistance |
a) The paint film is not peeling or blistering b) The luminance does not decrease by more than 3 units compared to the original value |
(1 hr in oil at 25 ° C ± 2 ° C) |
|
14 |
Salt tolerance |
a) The paint film is not peeling or blistering b) The luminance does not decrease by more than 3 units compared to the original value |
(18 h in salt at 25°C ± 2°C) |
|
15 |
Water resistance |
a) The paint film is not peeling or blistering b) The luminance does not decrease by more than 3 units compared to the original value |
(72 h in water at 25 ° C ± 2 ° C) |
|
16 |
Alkali resistance |
a) The paint film is not peeling or blistering b) The luminance does not decrease by more than 3 units compared to the original value |
(48 h in alkaline at 25 ° C ± 2 ° C) |
|
17 |
Weather resistance a) White paint b) Yellow paint
c) Black paint |
a) and b) the paint film remains the same. Brightness is achieved 75 % 55 % c) Do not apply |
BS 3900-F4 (500-man artificial atmospheric test) |
|
18 |
Abrasion |
≤ 500 mg |
(Weight loss due to abrasion after 100 grinding rings) |
|
Field trial |
|
||
|
1 |
Abrasion |
Area of the remaining line ≥ 90% Abrasion index ≤ 35 |
(Using a standard image set) (The method of umbrella) |
|
2 |
Reflectivity |
≥ 50 % |
(Determine the reflectance at the time after application 1 h and after the traffic) |
USER MANUAL
1. Before painting:
- For paint (white, red, yellow, black) stir well before painting
- Reflective coating is mixed with reflective material (glass beads) at the rate of 0.1 - 0.2kg reflective / 1kg of coating
2. In construction
Order of construction:
- Surface treatment
- Apply paint (white, red, yellow, black) to dry for 15 minutes
- Apply a clear (colorless) + reflective coating and let dry for 15 minutes
- Surface treatment
- Must clean the dirt, grease ..
- Grease: Wash with organic solvent.
- Dirt: Clean by air blower, or by sweeping.
- Make flat surface to be painted
- The surface must be dry before painting
- Application method: Roller, brush or spray
STORAGE
- V-MARK solvent paint should be stored in a cool, dry place
- The storage temperature is from 10 to 40oC, preferably from 15 - 30oC.
- The container must be sealed to avoid evaporation of the solvent to affect the paint quality
* Note: Avoid direct contact with skin, eyes, use protective clothing, gloves, mask.
SAFETY MEASURES
- Keep out of reach of CHILDREN.
- Ensure good ventilation during application and wait for drying. Avoid breathing dust.
- Safety glasses should be worn when applying. In case of contact with eyes, rinse with plenty of water and seek medical advice.
- Use a suitable solvent to wipe off sticky paint on the skin, then use water and soap to rinse.
- Be careful when shipping paint. If the paint is poured, it is collected by spreading the soil or sand.
- ATTENTION OF RISK FIRE PROTECTION.
- DO NOT WASTE PAINTING OR WATER SOURCES