V-MARK TRAFFIC PRIMER
Detail
INGREDIENT
PRODUCT CHARACTERISTICS
The paint in the barrel is a homogeneous liquid without lumps, not precipitate.
Easy to clean by brush, roller and sprayer.
Alkali resistance and best weather resistance.
Durable with water
Hard, solid porcelain, hard to scratch.
Great cover. Cover all dark old paint stains to create a homogeneous white surface
Technical Specification V-MARK TRANSPORTATION
|
Numerical order |
Name of indicator |
Unit |
Technical requirements TCVN 8791-2011 |
Experimental methods |
Experimental results |
|
1 |
Color |
---- |
Crystal-clear |
ASTM D 6628-03 |
Crystal-clear |
|
2 |
Drying time (with 2 mm thickness) Air temperature 32 ± 2 oC
|
Minute |
Max 15 |
TCVN 2096:1993 |
12,40 |
|
3 |
Impact resistance |
kG.cm |
Min 50 |
TCVN 2100 : 2007 |
52,00 |
|
4 |
Bending strength |
mm |
Max 2 |
TCVN 2099 : 1993 |
1,20 |
|
5 |
Adhesion to the background |
% |
100 |
64TCN 93-95 |
100 |
|
6 |
Oil resistance at 25oC for 1h |
---- |
No flaking, blistering |
TCVN 8787 : 2011 |
No flaking, blistering |
|
7 |
Resistance to salt: soaked in 20% NaCl solution at 25 ° C for 18 hours |
---- |
No flaking, blistering |
TCVN 8787 : 2011 |
No flaking, blistering |
|
8 |
Alkali resistance: soaked in 20% NaOH solution at 25 ° C for 48 h |
---- |
No flaking, blistering |
TCVN 8787 : 2011 |
No flaking, blistering |
|
9 |
Water retention: Soak in water at 25oC for 72 hours |
---- |
No flaking, blistering |
TCVN 8787 : 2011 |
No flaking, blistering |
PASSIONAL REGIME
Dilution on request from 10 - 30%
WORK GUIDE
The essential construction tools: Roller. Brush. Water bucket charging
Step 1: Clean and moisten the wall surface
- Dry wall from inside to outside. Use abrasive grit or paper 40 to remove excess impurities on the wall. For old walls, you must remove old paint.
- Use a damp roller to wet the dirt for the purpose of cleaning dirt and at the same time damp the wall within the scaffolding on the scaffold.
Step 2: Rinse the mattit immediately after the wetted wall is still wet:
Step 3: Apply V-MARK primer from 1 to 2 layers
Prior to priming, wet the masonry wall so that the primer penetrates the floor.
Moisten the walls to wherever you roll the V-MARK primer to it. The damp wall will draw the primer deep into the floor. Drying time of primer coat is about 30 minutes to 1 hour depending on weather and humidity. Continue rolling the second coat.
CAPITAL AREA:
1 kg of V-MARK primer is about 6 - 7 m2 / 2 layers.
PRESERVATION
Store in covered steel enclosure in cool place protected from direct sunlight
Shelf life is 3 years from the date of manufacture
SAFETY AND ENVIRONMENTAL INFORMATION
- Keep out of reach of children
- Do not empty into drains and water courses
- The surface treatment before painting such as sanding, burning old paint ... can create harmful gas and dust is not good for community health.
- Avoid contact with skin and eyes. Immediately wash with soap and water. Do not use solvents or alcohol for washing.
In case of splashing, wash immediately with plenty of water and seek medical advice
- If swallowed, take the label to medical center for treatment
PACK :
Lon 18kg